GA1 - Math And Measurement: Question Preview (ID: 6821)


Below is a preview of the questions contained within the game titled GA1 - MATH AND MEASUREMENT: After Completing This Section, The Student Should Be Able To Demonstrate Basic Math Problems, Measurements Needed In The Graphic Communication Field, And Read A U.S. Customary Rule. To play games using this data set, follow the directions below. Good luck and have fun. Enjoy! [print these questions]


Play games to reveal the correct answers. Click here to play a game and get the answers.

how many picas are in an inch?
a) 6
b) 8
c) 10
d) 12

How many points are in 2 picas?
a) 14
b) 16
c) 20
d) 24

_____ is a principle unit of measurement of the point system equal to .166”.
a) International Standard Metric System
b) Pica
c) Point
d) U.S. Customary System

On a letterform image, a part of a letter that extends below the main part.
a) ascender
b) cap height
c) baseline
d) descender

_______ is a measure of the diameter of an individual pixel.
a) Color Depth
b) Dot Pitch
c) Four Pixels
d) Pixel

____ is digitizing of images, the frequency with which points are recorded. In Scanning, this is measured as the number of samples taken per inch, horizontally and vertically.
a) Color Depth
b) Dots Per Inch
c) Resolution
d) Sampling Rate

________ is a device used to measure paper thickness.
a) Caliper
b) Densitometer
c) Photometer
d) Spectrodensitometer

On a letterform image, a part of a letter that extends above the main part.
a) ascender
b) cap height
c) baseline
d) descender

The metric system is a decimal number system in which all units increase or decrease in size by _______.
a) 10
b) 12
c) 14
d) 16

One way of calculating enlargement or reductions of an image is to use a ____________.
a) Colorimeter
b) Densitometer
c) Proportion Scale or Wheel
d) Screen Angle

__________ is the weight, in pounds, of a ream of paper cut to the basic size for a particular grade of paper.
a) Base
b) Basic
c) Basis
d) Caliper

The process of fitting text into a specific amount of space is called ____.
a) Copyfitting
b) Leading
c) Letterspacing
d) Standard conversion

________________ is a color-measurement device that computes the light stopping or light-absorption ability of an image or a surface material.
a) colorimeter
b) densitometer
c) photometer
d) spectrodensitometer

_____________ is a measurement of the resolution of a computer monitor, a scanner, or an output device.
a) Color depth
b) Dots Per Inch/DPI
c) Resolution
d) Sampling Rate

_____________ the vertical distance separating each line of typeset copy, measured in points from one line to the next.
a) Copyfitting
b) Leading
c) Letterspacing
d) Standard conversion

_____________ is a means of quantifying an image’s sharpness of clarity.
a) Color depth
b) Dot pitch
c) Resolution
d) Sampling rate

The process of reducing or enlarging an image is called _____________.
a) Measuring
b) Resizing
c) Reproducing
d) Scaling

The ____ system of print measurement is used throughout the printing industry in the United States. Also a principal unit of measure for type and line spacing equal to approx. 1/7
a) International Standard Metric System
b) Pica
c) Point
d) US Customary System

How many picas are in 4 inches?
a) 6
b) 12
c) 18
d) 24

The U.S. Customary system uses units such as ____.
a) grams
b) inches
c) liters
d) meters

Play Games with the Questions above at ReviewGameZone.com
To play games using the questions from the data set above, visit ReviewGameZone.com and enter game ID number: 6821 in the upper right hand corner at ReviewGameZone.com or simply click on the link above this text.

TEACHERS / EDUCATORS
Log In
| Sign Up / Register