Review Game Zone
Flash Cards
(current)
Games
Teachers
Search
GA1 - Press Problems And Troubleshooting
Test Description: What to use to identify and troubleshoot printing problems on press due to ink, paper, and or equipment.
Instructions: Answer all questions to get your test result.
1) The _____________ is a circular pattern of lines used primarily to detect ink slur.
A
slur gauge
B
star target
C
test form
D
color bar
2) A(n) _____________ is a compilation of quality control devices on a single electronic, printed, negative, or positive sheet or page.
A
slur gauge
B
star target
C
color bar
D
test form
3) A(n) _____________ is a strip of color printed in the trim area of a press sheet that contains a variety of quality control devices.
A
color bar
B
star target
C
test form
D
slur gauge
4) Offset presses and duplicators are precision machines that require a great deal of preventative _____________.
A
repairs
B
maintenance
C
lubrication
D
greasing
5) _____________is the adhering of ink to the nonimage areas of the plate, caused by too much ink and not enough water on the plate.
A
dot doubling
B
slurring
C
scumming
D
piling
6) 2 reps fill out job ticket, double check each others work, and proofread all jobs before sending to the client for them to proof is standard operating procedure (SOP) for:
A
bindery and finishing
B
graphic design
C
press operator
D
customer service representative (CSR)
7) _____________is a change in sharpness caused by a slippage of the cylinders, usually in the around-the-cylinder direction.
A
scumming
B
slur
C
setoff
D
piling
8) _____________is a small area where screen tints of the three process colors are printed.
A
slur gauge
B
dot gain scale
C
gray balance patch
D
color bar
9) Which is NOT a way to eliminate static electricity on the press.
A
use antistatic sprays or solutions
B
string metallic tinsel across guide rollers
C
properly ground press and equipment
D
opening a window or outside door
10) Which is NOT a desirable paper characteristics for use on offset presses?
A
good water resistance
B
will not absorb moisture
C
paper must release active materials
D
high surface and internal bonding strength
11) Calculate total cost of a $250 job after a 6.55 percent sales tax is added.
A
$265.38
B
$256.38
C
$266.38
D
$16.38
12) Checks printed job with proof in folder, double checks that the correct quantity was printed before sending out is standard operating procedure (SOP) for:
A
press operator
B
customer service representative (CSR)
C
graphic design
D
bindery and finishing
13) Double checks plates before printing, checks makeready against proof in folder before printing job, double check that the correct quantity was printed is standard operating procedure (SOP) for:
A
graphic design
B
press operator
C
customer service representative (CSR)
D
bindery and finishing
14) _____________ is a quality control device on a color bar used to indicate slur caused primarily by cylinder slippage.
A
dot gain scale
B
slur gauge
C
color bar
D
star target
15) _____________ is the optical increase in the size of a halftone dot during prepress operations.
A
dot gain
B
test form
C
dot doubling
D
slur
16) _____________ is a quality control device consisting of a series of numbers used to indicate dot reproduction of halftones and process color.
A
dot gain scale
B
gray balance patch
C
color bar
D
slur gauge
17) _____________ is a compound applied, commonly a coating, on a substrate as a means of preventing the buildup of static electricity..
A
antioffset
B
antisetoff
C
antistatic solution
D
static solution
18) ___________a printing defect characterized by halftone dots printing twice, a type of visual stuttering or echo. This defect is commonly caused ba a loose blanket, excessive pressure between the blanket and the substrate, or excessive ink on the plat
A
dot gain
B
dot doubling
C
slip
D
slur
19) Which is NOT a reason to condition paper.
A
to let it acclimate to the temperature of the pressroom
B
to reduce curl
C
to reduce moisture
D
to prepare to print on the press
20) ________ is the an unwanted transfer of ink from one sheet to the back of the next. Causes: too much ink; fountain solution is too acidic, not enough drier, static in delivery pile, paper coating is poor quality
A
setoff
B
piling
C
scumming
D
slur
*select an answer for all questions
Check Results & Get Answers
Play Games with the Questions Above
Teachers: Create FREE classroom games with your questions
Click for more info!
©2007-2024
ReviewGameZone.com
|
About
|
Privacy
|
Contact
|
Terms
|
Site Map
WAIT! Find what you needed?
×
Still Looking for the Answers?
Have Another Question?
Play a Review Game with These Questions?
Want to Make Your Own Test Like This One?