Which of the following, along with the Z87 designation, should be stamped on the lens or frame of safety glasses in order to be considered industrial quality?

Maddie is sanding a piece of wood and sawdust entered her eye from not wearing safety glasses. What should be the first thing Maddie does?

Mark is working in the wood shop. Which of the following scenarios would be a safety hazard?

Elsa is using a miter saw to cut 2 x 4 lumber. What should she use to help hold the wood in place?

How far should fingers be kept away from the blade of a band saw?

The guard on a band saw should be set no more than __________ inch above the material.

Milly is using a sliding compound miter. Where should she start the cut on the material?

Which of the following is the most common type of fire extinguisher?

The best firefighting technique is which of the following?

Hearing loss usually occurs suddenly and without warning.

There is no need to wear safety glasses and a face shield at the same time.

Long hair should always be pulled back and pinned out of the way.

Most nail guns are equipped with a safety device, commonly called a contact safety.

When working with pneumatic tools, one should always wear appropriate eye protection.

A nail can follow the grain of the wood, causing it to curve and exit where it is not intended.

A band or scroll saw is used for cutting smaller pieces of materials and can cut curves.

Tools with cords having exposed wiring should only be used after the cord has been repaired using electrical tape.

Common sense is one of the most valuable tools when working in a shop.

Safety glasses may be taken off while operating power tools, in order to quickly inspect materials.

When using power tools, one should be aware of the actions of others in the work area.

Teachers: Create FREE classroom games with your questions Click for more info!
©2007-2024 Review Game Zone | About | Privacy | Contact | Terms | Site Map