GA1 - Finishing and Binding

Match it! Select the correct answer from the pull down...Good luck!

a method in which a metal wire is forced through the folded edge of a signature and formed into staples to hold the pages together.

__________________ uses glue or adhesive to hold the sheets together but allow them to be removed, as in the case of notepads.

_____________ a process in which pressure is used to force a sharp metal die through the stock. It is used to make irregular shapes.

________________ a mechanical binding method commonly used for booklets that might have to be altered by adding or removing pages.

The operation of making a small series of small cuts or slits in the substrate, using various types of blades or wheels on the press or folder.

The process of transferring a thin layer of metallic tone or color to a substrate, using heat and pressure.

______________ a method that uses an adhesive to hold sheets or signatures together and to fasten the flexible cloth or paper cover onto the body.

_____________ is a general term that applies to the many operations carried out during or following printing.