Review Game Zone
Flash Cards
(current)
Games
Teachers
Search
GA1 - Press Problems And Troubleshooting
Test Description: What to use to identify and troubleshoot printing problems on press due to ink, paper, and or equipment.
Instructions: Answer all questions to get your test result.
1) The _____________ is a circular pattern of lines used primarily to detect ink slur.
A
color bar
B
test form
C
slur gauge
D
star target
2) A(n) _____________ is a compilation of quality control devices on a single electronic, printed, negative, or positive sheet or page.
A
test form
B
color bar
C
slur gauge
D
star target
3) A(n) _____________ is a strip of color printed in the trim area of a press sheet that contains a variety of quality control devices.
A
color bar
B
star target
C
slur gauge
D
test form
4) Offset presses and duplicators are precision machines that require a great deal of preventative _____________.
A
repairs
B
maintenance
C
greasing
D
lubrication
5) _____________is the adhering of ink to the nonimage areas of the plate, caused by too much ink and not enough water on the plate.
A
dot doubling
B
slurring
C
scumming
D
piling
6) 2 reps fill out job ticket, double check each others work, and proofread all jobs before sending to the client for them to proof is standard operating procedure (SOP) for:
A
bindery and finishing
B
customer service representative (CSR)
C
graphic design
D
press operator
7) _____________is a change in sharpness caused by a slippage of the cylinders, usually in the around-the-cylinder direction.
A
scumming
B
piling
C
slur
D
setoff
8) _____________is a small area where screen tints of the three process colors are printed.
A
dot gain scale
B
slur gauge
C
gray balance patch
D
color bar
9) Which is NOT a way to eliminate static electricity on the press.
A
use antistatic sprays or solutions
B
opening a window or outside door
C
string metallic tinsel across guide rollers
D
properly ground press and equipment
10) Which is NOT a desirable paper characteristics for use on offset presses?
A
will not absorb moisture
B
paper must release active materials
C
good water resistance
D
high surface and internal bonding strength
11) Calculate total cost of a $250 job after a 6.55 percent sales tax is added.
A
$16.38
B
$265.38
C
$266.38
D
$256.38
12) Checks printed job with proof in folder, double checks that the correct quantity was printed before sending out is standard operating procedure (SOP) for:
A
customer service representative (CSR)
B
bindery and finishing
C
press operator
D
graphic design
13) Double checks plates before printing, checks makeready against proof in folder before printing job, double check that the correct quantity was printed is standard operating procedure (SOP) for:
A
bindery and finishing
B
graphic design
C
customer service representative (CSR)
D
press operator
14) _____________ is a quality control device on a color bar used to indicate slur caused primarily by cylinder slippage.
A
slur gauge
B
star target
C
dot gain scale
D
color bar
15) _____________ is the optical increase in the size of a halftone dot during prepress operations.
A
slur
B
dot doubling
C
test form
D
dot gain
16) _____________ is a quality control device consisting of a series of numbers used to indicate dot reproduction of halftones and process color.
A
color bar
B
gray balance patch
C
dot gain scale
D
slur gauge
17) _____________ is a compound applied, commonly a coating, on a substrate as a means of preventing the buildup of static electricity..
A
antisetoff
B
antistatic solution
C
static solution
D
antioffset
18) ___________a printing defect characterized by halftone dots printing twice, a type of visual stuttering or echo. This defect is commonly caused ba a loose blanket, excessive pressure between the blanket and the substrate, or excessive ink on the plat
A
slip
B
slur
C
dot gain
D
dot doubling
19) Which is NOT a reason to condition paper.
A
to prepare to print on the press
B
to reduce curl
C
to reduce moisture
D
to let it acclimate to the temperature of the pressroom
20) ________ is the an unwanted transfer of ink from one sheet to the back of the next. Causes: too much ink; fountain solution is too acidic, not enough drier, static in delivery pile, paper coating is poor quality
A
slur
B
piling
C
setoff
D
scumming
*select an answer for all questions
Check Results & Get Answers
Play Games with the Questions Above
Teachers: Create FREE classroom games with your questions
Click for more info!
©2007-2024
ReviewGameZone.com
|
About
|
Privacy
|
Contact
|
Terms
|
Site Map
WAIT! Find what you needed?
×
Still Looking for the Answers?
Have Another Question?
Play a Review Game with These Questions?
Want to Make Your Own Test Like This One?