What is the name given to the shallow depression in the cathode assembly?

Which of the following best describes the circular path that will be struck by the electron beam in the x-ray tube?

Which of the following materials must be utilized to fill the space between the envelope and the tube housing?

What type of unit has the x-ray tube and bucky tray travelling in opposite arcs during exposure?

Single phase generators that have full-wave rectification create a voltage ripple of how many pulses per Hertz (120 pulses per second)?

According to US Public Law 90-602, for exposures above 50 kVp, the exposure must not exceed what milliampere-seconds (mAs)?

Nearly all x-ray equipment operates from an incoming line of how many volts?

What circuit modifies the incoming line power to generate the thermionic emission in the filament wire of the x-ray tube?

A full-wave rectified, three phase, six-pulse waveform has about what percent voltage ripple?

Which of the following is the most costly tube suspension system?

What is the range, in milliamperes (mA), of a diagnostic x-ray unit?

Which device or component on an x-ray table holds the cassette/detector in place?

What is the power rating in kilowatts (kW) for a three-phase generator that is able to deliver 100 kVp at 1,500 mA?

Which of the following is the more likely cause of x-ray tube breakdown?

Which of the following is the most common material used for filtering the x-ray beam?

Which of the following is not part of the cathode assembly?

Cracking of the anode typically occurs ____.

Leakage radiation from the lead-lined housing must not exceed ____.

If the peak kVp is 110, the average keV energy of the beam would be ____ keV.    This is a single phase machine.

The only portion of the anode assembly that is placed outside the vacuum of the envelope is the ____.

Teachers: Create FREE classroom games with your questions Click for more info!
©2007-2024 Review Game Zone | About | Privacy | Contact | Terms | Site Map